1. Before installing the pressure reducing valve, the pipe system must be cleaned and cleaned to prevent the slag and scale from flowing into the valve and affect the normal operation of the valve.
2. Pressure relief valve should be installed for easy operation and maintenance of the place, and must be installed in the horizontal pipe upright, (see the installation diagram), should pay attention to the flow of media in the pipeline and the arrow on the direction shown, cut Do not anti-installed.
3. Pressure relief valve in the installation, the bypass valve should be opened to exclude the condensation of water in the pipeline and the mixture of soft drinks to prevent the valve open when the phenomenon of water damage occurs when the valve, when no After the abnormality, turn the adjusting screw clockwise slowly, and adjust the outlet pressure to the required pressure (after the gauge pressure of the valve). After adjustment, tighten the locking nut and screw on the protective cover.